Cutting Errors
Few people realize that during fabric cutting, even errors of up to 2 millimeters on each edge result in size discrepancies. It is frustrating to realize you are sewing a size 44, only to end up with something half a size (or even twice) larger.
## Why do errors occur?
- Tracing the pattern. Neglecting this step leads to edges not being as they should. The pattern can shift on the fabric, and the layers of fabric can also shift. You shouldn't just stick a pin in; you need to pull the edge outward.
- Thick chalk lines.
- Shifting of the pattern while tracing.
- Not using pins when cutting two or more layers of fabric.
- Dull scissors or holding them incorrectly.
## To avoid these errors, follow a few rules:
- Secure the pattern using pins and weights. Only then trace with chalk. You can use special weights or household items (books, glasses, etc.) as weights.
- Always use chalk that leaves a thin line. When cutting, aim for the inner edge of the line.
- If cutting 2 or more layers of fabric, pin them together along the inner lines after tracing, without crossing them, so the pin heads don't get in the way of the scissors. Pin slowly, trying not to lift the fabric.
- Always use sharp tailor's scissors. Office, manicure, or other household scissors are not suitable and will guaranteed shift the fabric.
- When cutting, the scissors should touch the table and be held strictly vertical to the fabric. Do not tilt them at corners and curves.
By following these simple rules, you are guaranteed to be able to cut fabric accurately and avoid many mistakes.
Well, if there are 10 edges, with a 2 mm deviation on each, that's already 2 centimeters. And considering they are on different sides, for example, it will be tight in the chest, just pressing under the arm, while the neckline is loose (well, that's an exaggeration, of course), but it's still true. Errors affect the size very significantly. And seams come apart when the thread tension in the machine is incorrect. Or when the stitch is weak.