Common Mistakes When Knitting Garments

When knitting a garment, beginners often make several classic mistakes that are not immediately obvious. As a result, the finished piece does not sit correctly: it pulls in one place, twists in another, or feels tight. To avoid this, review the basic rules considered the fundamentals of garment knitting.

1. When knitting any garment, remember that for comfortable movement the finished garment should be 6-15 cm larger than the body measurements. Pay special attention to body type, especially bust circumference. For example, if the bust is 100 cm, calculate as follows: 100/2 = 50 cm for the back width. For the front, add ease: 50 + 6 = 56 cm, because the front will be wider than the back.

For sporty sweaters, the ease can be 10-15 cm, and this extra width is relevant for both the front and the back so movement is not restricted.

2. The armhole on the back should always be 1-2 cm higher than the front armhole. When knitting and drafting the pattern, also account for a rounded back. The more pronounced the curve of the back, the more you need to add to the armhole height. The exception to these rules is garments for very small children.

3. When knitting the shoulder slope, remember that the shoulder slope line on the front should be 1-2 cm longer than the slope on the back.

4. Do not forget the back neckline. It is important to keep the depth and width of the neckline proportional.

If these rules are ignored, the garment will pull backward at the shoulders, and the collar or neckline will not hold its shape and will be dragged back, causing real discomfort. If anyone has something to add or correct, I will be waiting for comments. Smooth stitches to you!
****